Communication equipment and slip ring electrical check

Page Title: Communication equipment and slip ring electrical check
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-H-62185(AT)

4.5.1.9 Bilge pump electrical check. To determine conformance to 3.4.11.2, the bilge pump

electrical controls shall be turned on and the pump checked for operation.

4.5.1.10 Air cleaner blower electrical check. To determine conformance to 3.4.11.3, the air

cleaner electrical controls shall be turned on and the blower checked for operation and air flow.

4.5.1.11 Personnel heater electrical check. To determine conformance to 3.4.11.4, the

personnel heater electrical controls shall be turned on and the heater checked for operation.

4.5.1.12 Communication equipment and slip ring electrical check. To determine

conformance to 3.4.11.5 and 3.4.11.6, the electrical circuits supplying current to the

communication equipment and slip ring shall be checked at all points to assure continuity.

4.5.1.13 Power package and train test. To determine conformance to 3.6.2, the vehicle shall

be operated throughout all gear and speed ranges, the power plant, power train, final drives,

tracks, suspension system, and applicable controls.

4.5.1.14 Speed tests. To determine conformance to 3.6.5.1, the vehicle shall be operated at

specified speeds and checked for functional requirements.

4.5.1.15 Acceleration test. To determine conformance to 3.6.6, the vehicle shall be

accelerated from a standing start to the required speeds and the time checked.

4.5.1.16 Engine starting on grades and side slope tests. To determine conformance to 3.5.2

and 3.6.8.1, the engine shall start, oil pressure and temperature shall be maintained when

operating on specified grades and slopes. The 60 percent grade test may be conducted in

conjunction with brake holding test.

4.5.1.17 Stopping test. To determine conformance to 3.6.9.1, the vehicle shall be operated

on dry level hard-surfaced road free of loose material, and the results of 3 stopping tests shall be

averaged to make this determination.

4.5.1.18 Holding test. To determine conformance to 3.6.9.2, the vehicle shall be driven up a

specified grade, brakes applied and vehicle observed for movement, then with brakes locked for

parking the vehicle shall be observed for movement. During this test vehicle shall be combat

loaded or a simulated load in weight shall be placed on the vehicle, in a position that will not

restrict the flow of engine air (intake or exhaust).

4.5.1.19 Turning test. To determine conformance to 3.6.10, vehicle shall be operated and

turned to right and left as specified and checked for radius of turns.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business