 |
|||
|
Page Title:
Section II - Operation of the training device. |
|
||
| ||||||||||
|
|  MIL-M-82376B
APPENDIX A
30.2.3.1.2 Warm-up. The warm-up paragraph shall contain instructions for
energizing the equipment and for making it ready for operation, including the
application of power, energizing applicable systems, preliminary adjustments
and settings, and release of locks.
30.2.3.1.3 Operational check. The operational check paragraph shall
provide inspection instructions and check procedures for the energized
trainer. These tests shall be logically arranged detailed procedures which,
when applicable, may make use of Built-In-Test Equipment or computer programs,
to fully exercise the training device.
For example, the check sequence for a
flight simulator would include simulated engine start, before takeoff checks,
takeoff, climb, normal cruise, slow cruise, descent, and landing. It shall be
emphasized that all phases of the operational check must be accomplished
before the training device can be used.
30.2.3.2 Section II - Operation of the training device. Section II shall
contain instructions for and list the responsibilities for operation of the
training device under the headings, "Preoperational procedures," "Operational
procedures," and "Post-operational procedures."
a.
Preoperational procedures. The preoperational procedures paragraph
shall contain all procedures, such as making necessary adjustments
and briefing the student on what he has to do during simulated
operation, which must be completed before actual operation begins.
b.
Operational procedures. The operational procedures paragraph shall
describe the duties which are the responsibility of the instructor,
such as instructing, observing, and injecting simulated
difficulties of emergencies into the device. The simulated
difficulties or emergencies which are to be injected into the
device shall be listed in a logical order and the proper time and
phase of the operation when difficulties or emergencies will be
inserted shall be discussed. Procedures for all modes of operation
as required to exercise all capabilities of the training device
shall be included.
c.
Post-operational procedures. The post-operational procedures
paragraph shall provide the procedures for securing the training
device. This shall include such procedures as positioning
component assemblies, locking assemblies in proper position,
securing applicable systems, and securing electrical power.
30.2.4 Chapter 3 - Operator\Crew maintenance. When operator/crew level
maintenance checks and services are required, a PMCS table shall be prepared
in accordance with MIL-M-63036.
0023E3
81
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals