Click here to make tpub.com your Home Page

Page Title: Components and subassemblies
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-P-48450A(MU)
4.3.1.1 Submission of product.- Unless otherwise specified by the
contracting officer, inspection lot size, lot formation and presentation
of lots shall be in accordance with "Submission of Product" provisions
of MIL-STD-105.
4.3.2.1 Components and subassemblies.- All components and sub-
assemblies shall be inspected in accordance with the inspection provis-
ions contained in Supplementary Quality Assurance Provisions (SQAP
listed in the technical data package (TDP). In the absence of SQAP's,
the applicable Quality Assurance Provisions of MIL-F-13926 shall apply.
4.3.2.1.1 Periscopes.- Examination and tests related to Section 3
herein shall be performed on a single defect (individual characteristic)
basis in accordance with MIL-STD-105 and the sampling plans specified in
Tables I, II, III, IV, and V shall constitute the minimum inspection to
be performed by the supplier after first article approval and prior to
Government acceptance or rejection by item or lot.
4.3.2.2 100 Percent inspection.- The following requirements and
related tests shall be subjected to 100% inspection:
CHARACTERISTIC
REQUIREMENT
TEST PROCEDURE
Line of sight variation,
1.
4.6.4.3.3
passive viewing area
3.6.3.l.2c
Resolution, daylight viewing
2.
area
3.6.8.1
4.6.4,8
Resolution, passive viewing
30
3.6.8.2
area
4.6.4.9
Image intensifier tube
4.
3.6.9.1
4.6.4.1.1
Image steadiness
5.
4.6.4.1.2
3.6.9.2
6.
Reticle Brightness
4.6.4.1.3
3.6,9.3
7.
On-Off switch
4.6.4.1.4
3.6.9.4
Interchangeability, periscope
8.
with mount
3.2b
4.6.5.2
NOTE:
The tests in 4.3.2.2 shall be conducted at a temperature
0
between +60 and +90F.
TABLE I - CLASSIFICATION OF DEFECTS
CLASS
CRITICAL: NONE
MAJOR: AQL 0.65% Defective
NO l
CHARACTERISTIC
REQUIREMENT
TEST PROCEDURE
101.
Pre-vibration collimation,
passive reticle setting
3.6.3.1
4.6.3.1
102 l
Pre-vibration collimation,
daylight viewing area
3.6.3.1.1
4.6.3.1.1
103.
Vibration "B"
3.4.3.2
4.6.3.3
10

Privacy Statement - Press Release - Copyright Information. - Contact Us