 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-48578(MU)
4.3.2.2 Artillery Trainer. - Examination and tests related to
Section 3 herein shall be performed on a single defect (individual
characteristics) basic in accordance with MIL-STD-105 and the sampling
plans specified in Tables I thru IV herein. Examination and tests for
packaging, packing and marking shall be in accordance with MIL-P-14232
and Section 5 herein. The tabulated classification of defects in Tables
I thru III shall constitute the minimum inspection to be performed by
the supplier after first article approval and prior to Government accep-
tance or rejection by item or lot.
TABLE I. 100% INSPECTION
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
NO.
4.6.11
3.6.2
Power Input Controls
101
4.6.12
3.6.3
Deflection Movement
102
4.6.13
3.7
Sealing
103
These tests shall be conducted at a temperature
NOTE :
between 15C (60F) and 32C (90F).
4.3.3 Acceptance and rejection. - Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units and
resubmittance of rejected lots shall be in accordance with "Acceptance and
Rejection" as specified in MIL-STD-105.
4.4 Special sampling.
4.4.1 General. - One assembly shall be selected at random as a special
sampling from each 100 produced, The sample shall meet the requirements and
test in Table II.
TABLE II
TEST PROCEDURE
REQUIREMENT
CHARATERISTIC
NO.
Applicable Drawing
3.1
Fabrication
301
Visual
MIL-F-13926, MIL-O-
3.2
General Specification
302
13830-Visual
4.6.1
3.3
Interchangeability
303
4.6.10
3.6.1
Interface
304
4.4.2 Environmental. - One artillery trainer shall be selected at
random as a sample from each 50 produced, or from each month's production
whichever occurs first. Each sample shall meet the requirements and
tests in Table III and shall then meet all the requirements and tests
in Table I.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals