 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62145E
(Application for copies of SAE publications should be addressed to SAE, Inc.,
400 Commonwealth Drive, Warrendale, PA 15096.)
THE TIRE AND RIM ASSOCIATION, INC.
Year Book.
(Application for copies of Tire and Rim Association publications should be addressed to The
Tire and Rim Association, Inc., 3200 W. Market Street, Akron, OH 44313.)
* (Non-Government standards and other publications are normally available from the
organizations that prepare or distribute the documents. These documents also may be available
in or through libraries or other informational services.)
* 2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document shall take precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
* 3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.10, the
vehicle, components, assemblies, and accessories to be delivered under the contract shall be
standard or optional items, which meet or exceed the requirements of this specification. Except
as specified in 3.1.1 through 3.1.1.10, no removal, substitution or alteration of the chassis
manufacturer's standard or optional chassis components shall be made. All chassis items shall be
as represented and rated in the chassis manufacturer's technical data book. Special bodies or
mounted equipment shall be as represented and rated in the body and equipment manufacturer's
technical data. Technical data shall be limited to specifications and technical material identical
to that furnished to the authorized company representatives for selection of vehicle models and
components, and shall be on file in the engineering offices of the procuring activity, prior to
delivery of the items. The chassis model furnished shall be not older than the chassis
manufacturer's current model on the date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified in
3.1, the vehicle shall be furnished with special equipment as specified herein.
* 3.1.1.1 Painting and marking. Treatment, painting, identification markings, and data plates
shall be in accordance with MIL-STD-1223. The exterior color and identification markings shall
be in accordance with the requirements of MIL-STD-1223 for the military service identified by
the procuring activity (see 6.2). When specified (see 6.2), concealed markings shall be
furnished.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals