 |
|||
|
Page Title:
Table II. Quality conformance inspection - schedule and sequence. |
|
||
| ||||||||||
|
|  MIL-A-85802(AS)
4.4.1 Individual inspections. Individual inspections are those inspections
conducted on each actuator in accordance with the inspections listed in Table
II. Group 1. Failure pass any of these inspections shall be cause for
rejection of the actuator.
TABLE II. Quality conformance inspection - schedule and sequence. 1/
1/ Inspection sequence is denoted by the numbers in the sample
column. An X denotes inspection is not required.
2/ The operational and low frequency vibration tests shall not be
included in the sampling inspections (see 4.4.2).
4.4.2 Sampling inspections. A random sampling of actuators shall be selected
by the acquiring activity from each production lot in accordance with Table
III and shall be subjected to the inspections listed in Table II, Groups 1 and
2. Group 1 inspections shall be conducted prior to Group 2 inspections.
Failure of any sample to pass any of these Inspections shall be cause for
rejection of the entire lot (see 6.2.1d, 6.2.1e, and 6.2.1i).
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals