 |
|||
|
|
|||
| ||||||||||
|
| MIL-C-10578D
"Type II (Wipe-off) material - Add 1 part of the concentrated
material as received to 3 parts of water by volume. Use acid
resisting steel, earthenware crocks or other suitable mixing
tanks. Remove heavy rust by wire brush and heavy grease with a
grease solvent before applying the compound.
After proper dilution, apply by brush, rag, or sponge. Allow the
compound to remain on metal surface about one-half minute. Wipe
off residue first with damp rags, then with dry rags. No more
than a light film of gray-white coating shall remain before
application of paint."
"Type III (Inhibited) material - Add 1 part of the
concentrated material as received to 1 part of water by volume.
Remove heavy rust by wire brush and grease with a grease solvent
before applying the compound.
After proper dilution, apply by spray, dip or flow-brush. Allow
the conditioner to remain on the metal surfaces long enough so
that the rust is loosened or dissolved and may be removed by
rinsing with hot water. When the surface is dry, it may be
coated, preserved with a corrosion preventative or put directly
into service, as circumstances may indicate.
"Type IV (Nonfoaming) material - Add 1 part of the
concentrated material as received to 3 parts of water by volume.
Use acid resisting steel, earthenware crocks or other suitable
mixing tanks. Remove heavy rust by wire brush and heavy grease
with a grease solvent before applying the compound.
After proper dilution, apply by spray, rinse with water,
preferably hot; permit to dry thoroughly prior to application of
rust preventive or paint."
"Type V (Immersion tank) material - Add 1 part of he
concentrated material as received to 3 parts of water by volume.
Use acid resisting steel, earthenware crocks or other suitable
mixing tanks. Remove heavy rust by wire brush and remove all
grease with solvent or alkali bath before immersion in the
compound.
After immersion, wash metal surfaces thoroughly with water or
alkali solution followed by water, permit to dry thoroughly prior
to application of rust preventative or paint."
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals