|
| INCH-POUND
MIL-C-11015E
14 May 2001
SUPERSEDING
MIL-C-11015D
6 December 1962
MILITARY SPECIFICATION
CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE),
INACTIVE FOR NEW DESIGN
after 31 March 1999
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for general purpose, ceramic dielectric, insulated,
fixed capacitors for use in applications where variations in capacitance with respect to temperature, voltage,
frequency, and life can be tolerated.
1.2 Classification. Capacitors covered by this specification are classified by the style, as specified (see 3.1).
1.2.1 Part or Identifying Number (PIN). The PIN is in the following form, and as specified (see 3.1).
CK05
BX
100
K
Style
Rated temperature
Capacitance
Capacitance
(1.2.1.1)
and voltage
(1.2.1.3)
tolerance
temperature limits
(1.2.1.4)
(1.2.1.2)
1.2.1.1 Style. The style is identified by the two-letter symbol "CK" followed by a two-digit number; the letters
identify general purpose, ceramic dielectric, fixed capacitors, and the number identifies the shape and dimensions
of the capacitor.
1.2.1.2 Rated temperature and voltage-temperature limits. The rated temperature and voltage-temperature
limits are identified by a two-letter symbol. The first letter indicates the rated temperature as shown in table I; the
second letter indicates the voltage-temperature limits as shown in table II.
TABLE I. Rated temperature.
Symbol
Temperature (range)
C
A
-55 to +85
B
-55 to +125
C
-55 to +150
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT,
3990 East Broad Street, Columbus, OH 43213-1199, by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 5910
DISTRIBUTION STATEMENT A. Approved for public release; distribution
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |