 |
|||
|
Page Title:
Table II. Voltage-temperature limits |
|
||
| ||||||||||
|
|  MIL-C-11015E
TABLE II. Voltage-temperature limits.
Rated
Symbol
temperature
Capacitance change with reference to 25 C
symbol
Steps A to D incl of
Steps E to G incl of
(see table I)
table VIII
table VIII
Percent
Percent
R
+15, -15
+15, -40
B
W
+22, -56
+22, -66
A,B
X
+15, -15
+15, -25
A,B
Y
+30, -70
+30, -80
A
Z
+20, -20
+20, -30
C
1.2.1.3 Capacitance. The nominal capacitance value, expressed in picofarads (pf), is identified by a three-digit
number; the first two digits represent significant figures and the last digit specifies the number of zeros to follow.
When fractional values of a pf are required, the letter "R" is used to indicate the decimal point and the succeeding
digits of the group represent significant figures. Example: 2R2 indicates 2.2 pf.
1.2.1.4 Capacitance tolerance. The capacitance tolerance is identified by a single letter as shown in table III.
TABLE III. Capacitance tolerance.
Symbol
Capacitance tolerance
Percent ( )
K
10
M
20
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-I-46058 - Insulating Compound, Electrical (For Coating Printed Circuit Assemblies).
MIL-PRF-39014 - Capacitors, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and
Non-Established Reliability, General Specification for.
(See supplement 1 for list of associated specification sheets.)
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-202 - Test Method Standard, Electronic and Electrical Component Parts.
MIL-STD-1285 - Marking of Electrical and Electronic Parts.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals