 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-11272D
w/Amendment 1
1.2.1.4 Capacitance tolerance. The capacitance tolerance is identified by a single letter in accordance with
table II.
TABLE II. Capacitance tolerance.
Capacitance
tolerance ()
Symbol
B
0.10 pF
C
0.25 pF
D
0.50 pF
F
1%
G
2%
J
5%
K
10%
M
20%
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
*
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-PRF-23269
-
Capacitors, Fixed, Glass Dielectric, Established Reliability, General Specification
for.
(See supplement 1 for list of applicable detail specifications.)
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-202
-
Test Method Standard for Electronic and Electrical Component Parts.
MIL-STD-1276
-
Leads for Electronic Component Parts.
*
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or www.dodssp.daps.mil
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals