 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-11272D
w/Amendment 1
*
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/NCSL Z540.1
-
Calibration Laboratories and Measuring and Test Equipment - General
Requirements (Replaces MIL-STD-45662.)
*
(Copies of this document may be ordered online at www.ncsli.org or from NCSL International, 1800 30th Street,
Suite 305, Boulder, CO 80701-1026)
THE INSTITUTE FOR INTERCONNECTING AND PACKAGING ELECTRONIC CIRCUITS INC. (IPC)
J-STD-004
-
Requirements for Soldering Fluxes.
J-STD-006
-
Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed
Solid Solders for Electronic Soldering Applications.
*
(Copies of these documents can be ordered online at www.ipc.org or from the Institute for Interconnecting and
Packaging Electronic Circuits (IPC, INC.), 2215 Sanders Road, Suite 200 South, Northbrook, IL 60062.)
INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)
ISO-10012-1
-
Quality Assurance Requirements for Measuring Equipment - Part I: Metrological
Confirmation System for Measuring Equipment - First Edition.
*
(Copies of this document may be ordered online at http://webstore.ansi.org/ or from the American National
Standards Institute, 11 West 42nd Street, New York, NY 10036-0350)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related associated specifications, specification sheets, or MS sheets), the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS:
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheet. In the event of any conflict between requirements of this specification and the
specification sheets, the latter shall govern. (see 6.2)
3.2 Qualification. Capacitors furnished under this specification shall be a product which has been tested and has
passed the qualification tests specified in 4.4, and has been listed on or approved for listing on the applicable
qualified products list (see 6.3).
3.3 Material. The material shall be as specified herein. However, when a definite material is not specified, a
material shall be used which will enable the capacitors to meet the performance requirements of this specification.
Acceptance or approval of any constituent material shall not be construed as a guaranty of the acceptance of the
finished product.
3.3.1 Solder. Solder for electrical connections shall be in accordance with J-STD-006. In no case shall the solder
start to melt at a temperature of less than 200C.
3.3.2 Soldering flux. Soldering flux shall be in accordance with J-STD-004.
3.4 Design and construction. Capacitors shall be of the design, construction, and physical dimensions specified
(see 3.1).
3.4.1 Capacitor element. The capacitor element shall consist of alternate layers of glass dielectric and electrode.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals