|
| MIL-C-38418E(AS)
Extended storage at -65C and 10 minutes at +98C (except
b.
for the compass system controller where the upper temperature limit is
+85C).
Dielectric strength of 375Vac or 500Vdc.
c.
Vibration as specified in 4.6.8 and 4.6.19.
d.
e.
Pressure equivalent to 70,000 foot altitude (4.6.12).
Shock forces of 15 g's except for crash safety which shall be
f.
40 g's (4.6.22).
Humidity up to and including 95 percent (4.6.13).
g.
Exposure to fungus enzymes (4.6.14).
h.
Exposure to a simulated rainfall (4.6.15).
i.
Salt spray for a period of 48 hours (4.6.16).
j.
Exposure to blowing fine sand and dust particles (4.6.17).
k.
l.
Operation in explosive vapors (4.6.21).
m.
Exposure to sudden temperature changes (4.6.18).
Radio Noise Interference and Susceptibility. The control assembly
3.10
and each component shall meet the radio noise interference and
susceptibility requirements of MIL-I-6181.
Interchangeability - All pares having the same manufacturer's part
3.11
number shall be functionally and dimensionally interchangeable. The
drawing number requirements of MIL-D-1000 shall govern the manufacturer's
part number and changes thereto.
Electronic Components - The electronic components shall be in
3.12
accordance with MIL-E-5400 where applicable.
Electrical Power Requirements - The power source required for the
3.13
control assembly shall be 4-wire, 115/200V, 3-phase, 400 Hz, wye
(nominal) in accordance with MIL-STD-704, category B and as specified
herein. The compass system controller lighting shall utilize 5V ac or dc
at 1.0A maximum.
28
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |