 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-45010A
AMENDMENT
4.2.2.2 Sealed wooden boxes:
*
Delete "Categories" and "Defects" and substitute
"Classification of Characteristics"
Major, delete "AQL 0.40 percent" and substitute "Inspection
level II"
Minor, delete "AQL 1.50 percent" and substitute "Inspection
level II"
*
4.2.2.3
Sealed fiberboard carton:
Delete "Categories" and "Defects" and substitute
"Classification of Characteristics"
Major, delete "AQL 0.40 percent" and substitute "Inspection
level II"
Minor, delete "AQL 0.40 percent" and substitute "Inspection
level II"
4.2.3
Delete in its entirety and substitute:
"4.2.3
Testing.
PRECAUTION WARNING
This specification covers sampling and testing of toxic or
hazardous materials. Accordingly, it is emphasized that all
applicable safety rules, regulations and procedures must be
followed in handling and processing these materials.
*
4.2.3.1 Sampling. The tests described in 4.3 shall be
performed on samples representative of the batch which were
taken in accordance with ASTM Procedure E300, for solids.
Approximately 1 kg sample shall be taken in accordance
with MIL-STD-1916 except that in lieu of Table IV, the
following continuous sampling plan shall be used: i=7,
f=1/3 and there shall be no reduced or tightened inspection
level. If any sample fails to meet any test requirement,
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals