Click here to make tpub.com your Home Page

Page Title: Intermediate packaging
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-C-45300B
5.2.1.1.4 Intermediate packaging.  The packaged caps shall be packaged
in an intermediate container conforming to PPP-B-636, type CF,
class-domestic, variety DW and shall not exceed 20 pounds gross weight and
1.5 cubic feet in size.  Intermediate container quantities shall be in
multiples of 5 or 100
5.2.1.2 Commercial.  Cleaning, drying, preservation and packaging shall
be in accordance with ASTM D3951.
Packing shall be level A, B or commercial, as specified
5.2.2 Packing.
(see 6.2).
5.2.2.1 Level A.  The packaged caps shall be packed in overseas-type
containers conforming to PPP-B-621 or PPP-B-601.  The gross weight shall not
exceed the weight limitation specified in the applicable container
specification.  The containers shall be closed in accordance with the'
applicable container specification or appendix thereto.  Strapping shall be
zinc coated.
5.2.2.2 Level B.  The packaged caps shall be packed in domestic-type
containers conforming to PPP-B-621, or PPP-B-601, or PPP-B-640 or PPP-B-636.
The gross weight shall not exceed the weight limitations specified in the
applicable container specification.  The container shall be closed and
strapped in accordance with the applicable container specification or
appendix thereto.
5.2.2.3 Commercial.
Packing shall be in accordance with ASTM D3951.
5.2.3 Marking.
Marking shall be level A, B or commercial, as specified
(see 6.2).
5.2.3.1 Levels A and B.  Marking for levels A and B shall be in
accordance with MIL-STD-129 and any special marking specified in the
acquisition document (see 6.2).
5.2.3.2 Commercial.
Marking shall be in accordance with ASTM D3951.
NOTES
6.
Caps covered by this specification are used on the
6.1 Intended use.
following vehicles.
6.1.1 Type I.  The cap is used on military tactical vehicles which are
not used in fording operations.
6.1.2 Type II.  The cap is used on military tactical vehicles with fuel
supply systems designed for atmospheric venting through the fuel cap (fording
valve open) and fuel systems incorporating a vacuum relief valve or
combination vacuum and pressure relief valve (fording valve closed).
11

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business