 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-43866E (AR)
services conform to prescribed requirements. Unless otherwise
specified herein or in the contract, the provisions of
MIL-A-48078 shall apply and are hereby made a part of this
detailed specification.
4.1.1 Responsibility for compliance. All items must meet
all requirements of sections 3 and 5. The inspections set
forth in this specification shall become a part of the
contractor's overall inspection system or quality program. The
absence of any inspection requirements in the specification
shall not relieve the contractor of the responsibility of
assuring that all products or supplies submitted to the
Government fox acceptance comply with all requirements of the
contract. Sampling in quality conformance does not authorize
submission of known defective material, either indicated or
actual, nor does it commit the Government to acceptance of
defective material.
4.2 Classification of inspections. The following types of
inspections shall be conducted on this item:
a.
First article inspection
b.
Quality conformance inspection
4.3
First article inspection.
4.3.1 Submission.
The contractor shall submit a first
article sample as designated by the Contracting officer for
valuation in accordance with provisions of 4.3.2. The first
article sample shall consist of the following items in sample
quantities as indicated:
Part Description
Drawing Quantity
9312699 15 per cavity/(350)
Container, Top
9312700 15 per cavity/(350)
Container, Bottom
9312786 200
Closure
Container Assembly
9312697 350
Container Assembly
9312697 10
4.3.2
Inspection to be performed.
See MIL-A-48078 and
Table I.
4.3.3 Rejection.
See MIL-A-48078.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals