 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-50527 (MU)
6.1 Ordering data.- Procurement documents shall specify
the following:
a. Title, number and date of this specification.
b. Data cards shall be prepared for each lot in accord-
ance with the information specified in Standard MIL-STD-1167.
c. Provisions for submission of First Article Samples.
6.2 Inspection code numbers.- The tive-digit code numbers
assigned to the inspections herein are to facilitate future data
collection and analysis by the Government. These code numbers are
also used to correlate the characteristics cited on Equipment Lists
with the inspections listed in this specification. These code
numbers shall be listed on drawings of equipment designs submitted
by the contractor (see 6.3.5).
6. 3 Inspection equiment.- The contractor shall design
inspect ion equipment as required by the refe rented Equipment Lists
(EL) in accordance with the instructions of paragraphs 6.3.1 through
6.3.5.
6.3.1 Equipment lists .-Equipment lists indicate the availability
of inspection equipment designs by showing in the "Part Number"
column of the list of Inspection equipment (Form SMUPA 1010) the
number of drawings for Federal Stock numbers of existing equipment
designs, or codes as indicated in paragragh 6.3.2.- Design action
required of the contractor is described in paragraphs 6.3.3 and
6.3.4. The contractor will be required to prepare detailed drawings
in accordance with 6.3.4 for all the equipment coded as "Contractor
Design" in the "Part Number" column. These contractor designs
mustbe approved by t he Government prior to fabrication or
De signs shall be submitted for approval as
of the equipment
specified in 6.3.5.
6.3.2 Equipment list codes.- The inspection equipment as
defined in 6.3.3 and 6.3.4 will be designated in the EL by the
following codes:
CD - Contractor design on controlled contractor
format and/or commercial equipment.
MU - Army design, mandatory for use.
6.3.3 Army designs.- Army designs are reflected on detailed
drawings which completely depict all the information necessary
for the fabrication of the item of inspection equipment. The
contractor need provide no design when an Army design is listed
for an item of' inspection equipment. Army designs fall into two
basic classifications: mandatory (designated "MU") and non-mandatory
(indicated by drawing or Federal Stock Number). When an equipment
list references mandatory Army designs, the contractor shall comply
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals