|
| MIL-C-52037F(ME)
RUBBER MANUFACTURERS ASSOCIATION
Engineering Standards for Multiple V-Belt Drive.
(Application for copies should be addresses to the Rubber Manufacturers
Association, 1400 K Street, NW, Suite 900, Washington DC 20005).
SOCETY OF AUTOMOTIVE ENGINEERS (SAE)
J321 - Tire Guards for Protection of Operator of Earthmoving Haulage
Machines
3492 - Rivets and Riveting.
J682 - Rear Wheel splash and Stone Throw Protection
J683 - Tire Chain Clearance - Trucks, Buses, and Combinations of Vehicles
(Application for copies should be addresses to the Sociey of Automotive
Engineers, 400 Commonwealth Drive, Warrendale, PA 15096. )
Rule 442 - Usage of Solvents.
(Application for copies should be addressed to the South Coast Air Quality
Management District, 9150 Flair Drive, E1 Monte, CA 91731. )
TIRE AND RIM ASSOCIATION, INC.
(Application for copies should be addressed to The Tire and Rim Association,
Inc., 3200 West Market Street, Suite 304, Akron OH 44313. )
UNIFORM CLASSIFICTION COMMITTEE, AGENT
Uniform Freight Classification Rules
(Application for copies should be addressed to the Uniform Classification
Committee, ATTN: Tariff f Publishing Officer, Rm 1106, 222 South Riverside Plaza,
Chicago, IL 60606. )
( Non-Government standards and other publications are normally available from
the organization that prepare or distribut the documents. These documents also
may be available in or through libraries or other informational services. )
2.3 Order of precedence. In the event of a conflict between the text of this
document and the references cited herein, (except for related associated detail
specifications, specification sheets or MS standards), the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3.1 Description Each compressor unit (herein referred to as compressor)
shall consist of the following major components:
5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |