 |
|||
|
Page Title:
Table III. Trailer body specifications. - Continued |
|
||
| ||||||||||
|
|  MIL-C-52437C
TABLE III. Trailer body specifications. (Cont'd)
VMRS No.
Feature/Requirements
VMRS 71-005
Side Door Assembly Hinged.
As specified, provide hinged door and panel
assemblies as required for the operating
equipment panel assemblies; swing up awning
panels; accordian panels, and other hinged
panel features. Door hardware of noncorrosive
marine container type.
Air seal flexible gaskets of silicone elastomer
type with abrasion protection and installation
not subject to damage by personnel foot traffic.
Personnel doors equipped with hold-open
catches and door bumpers.
Anti-drip rain protection over each personnel
door.
Provide personnel doors having a size min.
30-in. wide by min. height as specified or
69-in. high.
Door centered approximately 80 percent of the
interior length from rear of body. Door hung
to open outward and hinged on forward
exterior edge. Hinge of full height piano type
having min. 1/4-in. stainless steel hinge pin.
Roller-on-ramp latching mechanism featuring
upper and lower securing. Inside and recessed
or flushed outside door handles.
Door lockable from outside by a padlock
having a min. 3/8-in. dia. shackle.
Lining - Flat Fiber Glass.
VMRS 71-008
Lining - Moulded Fiber Glass.
& 71-009
As specified, apply interior lining panels of the
pebble or of the smooth flat refrigerator FRP
type. Panels having laminate of min. 18 oz.
per sq. yd. material or woven roving (W.R.) or
a combination of both. Ceiling, front, and
sides min. 0.187-in. thick FRP sheet.
FRP panels of the low-fire-hazard type having
a min. UL class B fire hazard classification.
Panel features per ASTM E-84.
64
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals