 |
|||
|
Page Title:
Table I. Safe Load Capacity (In Kips) |
|
||
| ||||||||||
|
|  MIL-C-52911(ME)
(b)
Performing clamshell bucket operation when equipped with the
applicable front end attachments (see 3.12 and 4.2.7).
(c)
Supporting military standard pile-driving leads for
pile-driving operation with diesel-powered hammer
(see 3.12 and 4.2.8).
Starting and operation in any ambient temperature from minus
(d)
25 F to 125 F with onboard capability only,
(e)
Attaining a travel speed of not less than 40 miles per hour
(mph) on level paved roads.
Traveling on unimproved terrain found in construction sites.
(f)
(g)
Negotiating a 20 percent longitudinal slope and a 10 percent
side slope.
(h)
Superstructure rotation at a speed not less than 2 revolutions
per minute (rpm).
(i)
Night construction operation.
Being driven into and off a C-5A aircraft (see Figure 1), All
(j)
components that are required to be removed from the
crane to facilitate loading and unloading the crane shall
have adequate on-crane storage mounting facilities.
Instructions or procedures for removal and installation
of components and for loading and unloading shall be
provided.
Traversing a V-ditch course having a pitch of 7 to 9 feet and
(k)
an amplitude of 1 to 1-1/2 feet both perpendicular to and
diagonally across the trough of the ditches.
3.3 "Carrier. The carrier with the use of outriggers shall provide
rigid support for the revolving superstructure when under maximum
loads. The carrier shall be provided with power-assisted front wheel
steering which incorporates manual steering in the event of power
failure. The two rear axles (in tandem) shall be power driven. A
boom rest and front towing eyes shall be provided on the carrier.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals