length - inches.
Height - inches.
Width - inches.
Cube - cubic feet.
Gross vehicle weight - pounds.
Center of gravity - location, inches.
3.14.2 Stenciling. The gross weight and location of the center of gravity on each end item
shall be stenciled on each unit in a manner easily discernable to personnel handling the
3.15 Instruction plates. Each compressor shall be equipped with instruction plates or
diagrams, including warnings and cautions, describing any special or important procedures to be
followed in assembling, operating or servicing the compressor. Instruction plates shall conform
to MIL-P-514, type III, composition C, of type I, grade A, class 1 material. Plates shall be
attached by screws, bolts or rivets in a conspicuous protected location.
3.16 Treatment and painting. The compressor, components, and parts painted in commercial
practice shall be cleaned, treated and painted in accordance with MIL-T-704, type F or G, as
applicable. Unless otherwise specified (see 6.2), top coat color shall be camouflage green 383
conforming to MIL-C-46168. When specified (see 6.2), the compressor shall be overcoated in
accordance with the Government furnished camouflage patterns with MIL-C-46168 top coat of
the colors specified in the camouflage patterns except tile first article may be camouflage
green 383. Components which will reach temperatures of 450 F or more shall not be
overcoated with MIL-C-46168 top coat.
3.16.1 Camouflage pattern data. When specified (see 6.2), the contractor shall be provide
camouflage pattern data.
3.17 Government-furnished property. Except as specified for size 25 CFM compressors and
unless otherwise specified (see 6.2), the following property in quantities indicated will be
furnished by the Government for the applicable size compressor (see 6.5):