 |
|||
|
|
|||
| ||||||||||
|
|  MIL-c-62205B(AR)
3.3.8 115V angle signals. With the 115 Vrms analog signal (item 3.4 of
table I) applied as specified therein, the output voltage between pins P2-28
and P2-32 shall be 78 12 Vrms, 400 Hz. With pin P2-32 connected to pin P2-33
and pin P2-28 connected to pin P2-30, the output voltage between pins P2-28
and P2-32 shall be 10 2 Vrms, 400 Hz. (See 4.6.2.8)
3.3.9 Laser feedback signal. With the 100 kilohm load (item 1.3 of table
I) connected as specified, the following apply: (See 4.6.2.9)
a. with the application of the 1000 mV rms analog signal (item 3.3
of table I) between pins P2-34 and P2-17, the output voltage
between pins P2-37 and P2-17 shall be 2000.0 +4.0/-8.0 mV rms,
400 Hz, or the output voltage ratio between pins P2-37 and P2-34
shall be 2.000 +0.004/-0.008 V/V.
b. With the application of the 1000 mV rms analog signal between
pins P2-36 and P2-17, the output voltage between pins P2-37 and
P2-17 shall be 8000.0 +16/-32 mV rms, 400 Hz, or the output vol-
tage ratio between pins P2-37 and P2-36 shall be 8.000
+0.016/-O.O32 V/V.
3.3.10 Stator signal. With the 1 kilohm load (item 1.2 of table I)
connected as specified, the following apply: (See 4.6.2.10)
a. With the application of the 100 mV rms analog signal (item 3.2
of table I) between pins P2-12 and P2-17, the output voltage
between pins P2-35 and P2-17 shall be 5000 +10/-500 mV rms, 400
Hz, or the output voltage ratio between pins P2-35 and P2-12
shall be 50.00 +0.10/-5.00 V/V.
b. With application of the 100 mV rms analog signal between pins
P2-13 and P2-17, the output voltage between pins P2-35 and P2-17
shall be 5000 +10/-500 mV rms, 400 Hz, or the output voltage
ratio between pins P2-35 and P2-13 shall be 50.00 +0.10/-5.00 V/V.
3.3.11 TPG inhibit (1) and min rng inhibit (3) signals. The output
voltages between pins P2-1 and P1-7 and pins P2-5 and P1-7 shall be 4.2 1.0
V. With the logical zero digital type-A signal (item 3.1 of table I) applied
between pins P2-2 and P1-7 and pins P2-6 and P1-7, the output voltages between
pins P2-1 and P1-7 and pins P2-5 and P1-7 shall be 0.20.2 V. (See
4.6.2.11)
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals