Click here to make tpub.com your Home Page

Page Title: Quality Assurance Provisions
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-C-62310A(AT)
3.8 Noise level. With a sound level meter (see 4.7.35) located 4 inches forward of the
engine compartment rear bulkhead, 4 inches to the left of engine compartment left bulkhead, and
12 inches below the inside surface of the top armor plate, and the vehicle traveling at 30 mph in a
1-3 gear range on a hard-surfaced straight road with all doors and hatches closed, the sound level
shall not exceed 119 db (A).
3.8.1 Noise hazard caution sign. The vehicle driver and passenger compartments shall be
posted as noise hazardous areas as specified in MIL-STD-1474.
3.9 Fire extinguisher. The fixed fire extinguisher system, when installed in accordance with
applicable drawings, shall be readily accessible for servicing and operation internally and
externally.
3.10 Workmanship. Workmanship shall be of such quality as to assure that the vehicle and
its components are free of defects that compromise, limit or reduce capability in the performance
of its intended use. In addition to general appearance, the defects listed in table IV shall be
considered to be cause for failure.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract, the contractor
is responsible for the performance of all inspection requirements specified herein. Except as
otherwise specified in the contract, the contractor may use his own or any other facilities suitable
for the performance of the inspection requirements specified herein, unless disapproved by the
Government. The Government reserves the right to perform any of the inspections set forth in
the specification where such inspections are deemed necessary to assure supplies and services
conform to prescribed requirements.
4.1.1 Materials and qualified products. The contractor's records shall be reviewed to
determine conformance to 3.3 and 3.3.2.
12

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business