 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-70497(AR)
The interconnect shall meet the
3.3 Environmental.
requirements specified herein unless otherwise specified.
3.3.1 Room ambient temperature. The requirements of this
specification shall be met with the interconnect thermally
0
0
stabilized at room ambient temperature of +16 C to +32 C
(+60F to +90F), unless otherwise specified in the
requirements paragraph.
3.3.2 Environmental stress screen (ESS) temperature. The
interconnect shall meet the requirements of 3.2.1 after having
been exposed to a minimum of ten temperature cycles at
temperatures of -57C and +71C (-71F and +160F).
3.3.3 Environmental stress screen (ESS) vibration. The
interconnect shall meet the requirements of 3.2.1 after having
been subjected to a random or pseudorandom vibration which
includes frequency content from 100 Hz to 1000 Hz and up to a 3g
RMS in two axis for a period of 10 minutes plus or minus 15
seconds.
The interconnect shall be manufactured in
3.4 Fabrication.
accordance with drawing 9355699.
3.5 First article. When specified in the contract, a sample
shall be subjected to first article inspection (See 4 and 6).
The workmanship requirements of MIL-F-13926
3.6 Workmanship.
and MIL-STD-454 shall be met. All components shall be fitted
properly and firmly in their respective positions. All electrical
connections shall be mechanically secure and electrically sound.
There shall be no evidence of corrosion, burrs, roughness, sharp
edges or other defects which could adversely affect its use or
suitability for the purpose intended.
Materials shall be in accordance with
3.7 Materials.
drawings, material specifications and general specifications
forming a part of this specification.
QUALITY ASSURANCE PROVISIONS
4.
4.1 Responsibility for inspection. Unless otherwise
specified in the contract or purchase orderf the contractor is
responsible for the performance of all inspection requirements as
specified herein. Except as otherwise specified in the contract
or purchase order, the contractor may use his own or any other
facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the
Government. The Government reserves the right to perform any of
the inspections set forth in this specification where such
inspections are deemed necessary to assure supplies and services
conform to prescribed requirements.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals