 |
|||
|
Page Title:
Packaging, packing, and marking |
|
||
| ||||||||||
|
|  MIL-C-70509(AR)
(1) No re-test permitted. Lot shall be rejected.
(2) Primer not in pocket after firing and both head of
cartridge case and pocket enlarged and distorted.
4.4.4 Packaging, packing, and marking. Inspection for
packaging, packing and marking shall be in accordance with
During or immediately prior to the packaging
MIL-STD-644.
operation, 100 percent examination of the cartridges shall be
performed to ascertain that the cartridge type conforms to the
drawing. Occurrence of any incorrect type other than high
pressure test shall be classed as a major defect. All
non-conforming cartridges shall be rejected.
4.4.5 Inspe ction equipment. The inspection equipment
required to perform the examination and test prescribed herein is
described in the Paragraph Reference/Inspection method column in
the table starting with Paragraph 4.4.2.1. The contractor shall
submit for approval inspection equipment designs in accordance
with the terms of the contract. See Section 6 of MIL-A-48078 and
6.2 herein.
4.4.5.1 Index of inspection equipment list. The examination
tests shall be made using equipment listed on L19378265.
4.5
Test methods and procedures.
4.5.1 Primer sensitivity.
The test shall be conducted in
accordance with DOD-STD-1468.
4.5.2 Bullet extraction.
The test shall be conducted in
accordance with DOD-STD-1468.
The test shall be
4.5.3 Residual stress (mercurous nitrate).
conducted in accordance with DOD-STD-1468.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals