 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-70725A (AR)
unless disapproved by the Government. The Government reserves
the right to perform any of the inspections set forth in this
specification where such inspections are deemed necessary to
ensure supplies and services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet
all requirements of Sections 3 and 5. The inspection set forth
in this specification shall become a part of the contractor's
overall inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve
the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance
comply with all requirements of the contract. Sampling
inspection, as part of manufacturing operations, is an acceptable
practice to ascertain conformance to requirements, however, this
does not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to accept
defective material.
4.1.2 General provisions. Unless otherwise specified
herein, the provisions of MIL-A-48078 apply and form a part of
this specification. Reference shall be made to MIL-STD-109 to
define quality assurance terms used herein.
4.2 Classification of inspections. The inspection
requirements specified herein are classified as follows:
Qualification (see 4.3).
a.
First article inspection (see 4.4).
b.
Quality conformance inspection (see 4.5).
c.
4.3
Qualification.
The contractor shall submit a qualifi-
4.3.1 Submission.
cation sample of 75,000 cartridges as designated by the Con-
tracting Officer for evaluation in accordance with the provisions
of 4.3.3.
4.3.2 Qualification sample. The qualification sample shall
be of the same design as will be submitted for normal production.
It shall be manufactured using the same materials and processes
as will be used in normal production. Equipment utilized to
manufacture the qualification sample shall embody the process
techniques to be used in normal production. Qualification
samples shall not be custom made in such a way that causes the
product quality to be different than that which can be expected
in normal production.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals