Converter Group, "Enchaced" Digital Scan

• Converter Group, "Enchaced" Digital Scan
• Applicable Documents
• Other Publications
• Requirements
• Design and Construction
• Interconnecting Cabling
• Construction
• Maintainability Requirements
• Support Equipment Interface Requirements
• Built-In-Test Equipment
• Standard Conditions
• Temperature (Non-Operating)
• Input Electrical Power
• Mode Compatibility
• CRT Brightness Requirements
• Scratches
• PPI Display Accuracy
• PPI Range Scales
• Expanded Display
• Expand Range Scale
• Hold Display Symbology
• TF Display Accuracy
• SIDS Display
• FLIR Display
• Range Scale Selection
• AGR Processor Operation
• Data Channel Signal Characteristics
• CDCE Data Channel
• AGR Data Channel
• Identification Word
• Radar TF Failure Monitoring
• Power Supply Programmer Test
• Transmitter Test
• Antenna-Receiver Test
• AGR Tests via SDC Test Switch
• TF Self-Test Protection
• Blanking Pulse
• Recorder Composite Video
• Brilliance Potentiometer
• Cursor Intesity Potentiometer
• Electrical Connections
• Form Factor
• Cursor Intensity Potentiometer
• Quality Assurance Provisions
• Temperature - Altitude Test
• Vibration Test
• Scope of Individual Tests
• Marking for Shipment
• Associated Equipment
• Failure
• Table I. WRA Interface Connectors
• Table II. Physical Interchangeable Units
• Table III. Indentification Resistor (IDR) Values
• Table IV. Associated Equipment
• Table V. SDC Cooling Air Supply Characteristics
• Table VI. Display Mode
• Table VII. CRT Spot Defect Acceptance Criteria
• Table VIII. SDC Interface
• Table VIII. SDC Interface - Continued
• Table VIII. SDC Interface - Continued
• Table VIII. SDC Interface - Continued
• Table VIII. SDC Interface - Continued
• Table VIII. SDC Interface - Continued
• Table IX. Formad CRTD Interface
• Table IX. Formad CRTD Interface - Continued
• Table X. Aft CRTD Interface
• Table XI. Aircraft Sensor Priorities
• Table XII. AGR Tracking Accuracy for Clutter Targets
• Table XIII. CDCE Data Channel Information Bit Significance
• Table XIV. Protection Interface
• Table XV. Protected Signals
• Table XVI. SDC Interface Connectors
• Table XVII. SDC Vibration Test
• Table XVIII. CRTD Vibration Test
• Figure 1. SDC Vibration Test Spectrum - Random (Operational)
• Figure 2. SDC Vibration Test Spectrum - Random (Endurance)
• Figure 3. SDC Vibration Test Spectrum - High Fire Rate Pulse
• Figure 4. SDC Vibration Test Spectrum - High Fire Rate Pulse
• Figure 5. SDC Vibration Test Spectrum - Low Fire Rate Pulse
• Figure 6. SDC Vibration Test Spectrum - Low Fire Rate Pulse (Y, Z Axes)
• Figure 7. CRTD Vibration Test Spectrum - Random (Operational)
• Figure 8. CRTD Vibration Test Spectrum - Sinusoidal
• Figure 9. CRTD Vibration Test Spectrum - High Fire Rate Pulse
• Figure 10. CRTD Vibration Test Spectrum - Low Fire Rate Pulse
• Figure 11. Environmental Burn-In Test Cycle
• Standardization Document Improvement Proposal
• Business Reply Mail
• Blank Page

Converter Group, "Enhanced" Digital Scan

Privacy Statement - Press Release - Copyright Information. - Contact Us