 |
|||
|
Page Title:
Examination for visual characteristics |
|
||
| ||||||||||
|
|  MIL-D-38024B
Examine
Defect
Classification
Major
Minor
Seams
Open seam
x
Open seam overstitched less than 1 inch
x
NOTE:
A seam shall be classified as open whenever
breaks, runoffs, or two or more consecutive
skips occur in stitching and are not over-
stitched or restitched as specified.
stitches and
Not type of stitch specified
x
stitching
Ends of stitching not secured as
specfied (except where turned
under in a hem or held down by
other stitching)
x
One Stitch per inch less than minimum
specified
x
Two or more stitches per inch less
than minimum specified
x
One or more stitches per inch in
excess of maximum specified
x
loose tension, resulting in loose
top or bobbin thread; or tight
tension resulting in tightness
or puckering of material at switch
line
x
Thread ends not trimmed
x
Any row of stitching missing
x
Needle Chews
x
Stitching pattern not complete
x
Stitch margin or gage not as
specified
x
Stitching run-off at edge cutting
material
x
Nylon cloth and
HoLes, tears, or cuts
X
X
tape
Abrassion or thin material
Nylon cord
Cut, tear or break
x
Abrasion, or seared area (except on
ends of cord)
x
Any splice or not continuous
x
Ends not seared
x
Identification
Missing, illegible, incorrect, wrong
marking
color, or location, or not applied
as specified
x
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals