End item dimensional examination

Page Title: End item dimensional examination
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-D-44144A(GL)

4.4.3 End item dimensional examination. The end item shall be examined for

compliance with dimensions specified. The lot size shall be expressed in units

of drying tumblers. Any dimension that is not within the specified tolerance

shall be classified as a defect. The sample unit shall be one drying unit. The

inspection level shall be S-2 and the AQL, expressed in terms of defects per

hundred units shall be 6.5.

4,4.4 End item testing. Each production end item shall be tested for the

characteristics listed in table II. Failure of any test shall be cause for

rejection of the end item involved.

TABLE II.

Performance tests

4.4.5 Packaging examination. An examination shall be made to determine that

preservation, packaging, and marking comply with the requirements of MIL-L-3153.

4.5 Code and standard compliance. Certifications, certified `test reports, or

listing marks for standards submitted in accordance with 3.2 shall be examined

and validated as proof of compliance. Prior to Government approval of first

shipment, the contractor shall submit to the contracting officer or his

authorized representative for approval, certification that the drying tumblers

he proposes to furnish under this document meet the applicable requirements of

NFPA 70, and UL and OSHA 29 CFR 1910.264 as follows:

4.5,1 NFPA. Acceptable evidence of meeting the requirements of NFPA shall be

the manufacturer's certified statement that the tumbler is wired for use in non-

hazardous locations in accordance with NFPA Standard 70.

4.5.2 UL. Acceptable evidence of meeting the requirements of UL shall be the

UL listing mark, or a certified test report from a recognized independent

testing laboratory, acceptable to the Government indicating the the tumbler

wiring, fittings and conduit conform to applicable UL requirements as specified

on the applicable drawings.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business