|
| MIL-D-537F
No.
Defect
A
B
C
117.
Technical data, when furnished, not preserved as
5.2.1.3
specified.
118.
Alternate unit container not as specified for level
5.2.1.3
A.
119.
Intermediate container not as specified for
5.2.1.4
5.2.2
level A.
120.
Alternate intermediate container not as specified
5.2.1.4
for level A.
121.
Quantity per intermediate container not as
5.2.1.4
specified for level A.
122.
Disks of unlike type and sized placed in same
5.2.1.4
5.2.2
intermediate container.
123.
Shipping container not as specified.
5.3.1
5.3.3
5.3.5
124.
Alternate shipping container not as specified.
5.3.2
5.3.4
125.
Box closure and strapping not as specified.
5.3.1
5.3.3
126.
Alternate box closure and, as applicable,
5.3.2
5.3.4
5.3.5
strapping and water proofing not as specified.
127.
Disks of unlike type and size packed in same
5.3.1,
5.3.3,
shipping container.
5.3.2
5.3.4
128.
Marking not as specified.
5.4.1
5.4.1
5.4.2
5. PACKAGING
5.1 Preparation. Each disk shall be cleaned, thoroughly dried and individually placed in a
plastic bag or envelope having a minimum thickness of 2 mils. A dropper (see 3.7) shall be
included in the envelope or bag with each type II, class 6 disk. Technical data when furnished,
such as an instruction book, an instruction card and a conversion sheet, shall be placed together as
a single set in a similar type plastic bag or envelope having a minimum thickness of 2 mils. The
plastic bag(s) or envelope(s) shall be sealed closed.
5.1.1 Preservation application. Preservatives shall not be utilized.
5.2 Preservation. Preservation shall be level A or C as specified (see 6.2).
5.2.1 Level A.
5.2.1.1 Cleaning and drying. Cleaning and drying (see 5.1), shall be in accordance with the
requirements of MIL-P-116.
5.2.1.2 Plastic bags or envelopes. The plastic bags or envelopes specified in 5.1 shall be
manufactured of polyethylene film conforming to L-P-378, type I, class 1. The filled bags or
envelopes shall be closed by heat sealing.
15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |