 |
|||
|
|
|||
| ||||||||||
|
|  MIL-D-70789A (AR)
4. QUALITY ASSURANCE PROVISIONS
4.1
Responsibility for inspection.
Unless otherwise
specified in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements as
specified herein. Except as otherwise specified in the contract
or purchase order, the contractor may use his own or any other
facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the
government. The Government reserves the right to perform any of
the inspections set forth in the specification where such
inspections are deemed necessary to ensure that supplies and
services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet
all requirements of sections 3 and 5. The inspection set forth
in this specification shall become a part of the contractor's
overall inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve
the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance
comply with all requirements of the contract. Sampling
inspection, as part of manufacturing operations, is an acceptable
practice to ascertain conformance requirements, however, this
does not authorize submission of known defective material, either
indicated or actual. nor does it commit the Government to
acceptance of defective material.
4.1.2 General Provisions. The component and subassembly
inspection requirements of MIL-F-13926 form a part of the quality
assurance provisions of this specification. Definitions of
inspection terms shall be as listed in MIL-STD-109.
4.1.3 Test equipment and inspection facilities. The
manufacturer shall insure that test and inspection facilities of
sufficient accuracy, quality and quantity are established and
maintained to permit performance of required inspections.
4.1.4 Witness of inspection. The government reserves the
right to witness any of the inspections set forth in this
specification. The supplier shall notify the government at least
5 working days in advance of performing any inspection. Witness
by the government does not imply certification or acceptance of
inspection results.
4.2 Classification of inspections. The inspection
requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.5).
96
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals