 |
|||
|
Page Title:
Table I. Sampling for quality conformance inspection. |
|
||
| ||||||||||
|
|  MIL-E-15809D(NAVY)
TABLE I. Sampling for quality conformance inspection.
Sample Size
Lot size
2
to 8
All
8
9
to 90
91
to 150
12
19
51
to 280
21
81
to 500
27
01
to 1200
35
01
to 3200
38
01
to 10,000
4.3 Examination.
4.3.1 In process examination. Intermediate assemblies which cannot be checked or measured
after final assembly shall be examined at various stages of manufacture for conformance to this
specification. Whenever a deviation is noted, correction shall be made. Failure to make immediate
correction may cause rejection of the affected end items.
4.3.2 Visual and dimensional examination. Each of the assembled expanders shall be
examined to determine conformance to this specification regarding dimensions, fits, finishes, security
of assembly, and freedom of movement of the parts. Each of the spare rolls shall be examined to
determine conformance to this specification regarding dimensions and finishes. Any expander or
spare roll which does not conform to this specification shall not be offered for delivery.
4.4 Inspection of packaging. Sample packages and packs, and the inspection of packaging
(preservative packing, and marking for shipment, stowage and storage shall be in accordance with
the requirements of section 5 and the documents specified therein.
5. PACKAGING
(The packaging requirements specified herein apply only for direct Government acquisition.)
5.1 Preservation-packaging, packing, and marking. Tube expanders shall be preserved and
packaged level A or C, packed level A, B, or C as specified (see 6.2), and marked including other
ordering data options as specified (see 6.2.) in accordance with PPP-P-40. In addition, for Navy
acquisitions, the following applies:
a. Navy fire-retardant requirements.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals