 |
|||
|
|
|||
| ||||||||||
|
| MIL-E-15809D(NAVY)
3.2.6 Sizes. Expander shall be sized according to the outside diameter of the tube and tubing
wall thickness (see 6.2).
3.3 Spares. A complete set of rolls shall be furnished with each expander.
3.4 Marking. The size and the manufacturer's name shall be indelibly stamped on each
expander.
3.5 Workmanship. The workmanship shall be first class in every respect.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase
order, the contractor is responsible for the performance of all inspection requirements
(examinations and tests) as specifed herein. Except as otherwise specified in the contract or
purchase order, the contractor may use his own or any other facilities suitable for the performance
of the inspection requirements specified herein, unless disapproved by the Government. The
Government reserves the right to perform any of the inspections set forth in this specification
where such inspections are deemed necessary to ensure supplies and service conform to prescribed
requirements.
4.1.1 Responsibility for compliance. All items must meet all requirements of sections 3 and
5. The inspection set forth in this specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any inspection requirements in the
specification shall not relieve the contractor of the responsibility of ensuring that all products or
supplies submitted to the Government for acceptance comply with all requirements of the contract.
Sampling inspection, as part of manufacturing operations, is an acceptable practice to ascertain
conformance to requirements, however, this does not authorize submission of known defective
material, either indicated or actual, nor does it commit the Government to acceptance of defective
material.
4.2 Quality conformance inspection. Quality conformance inspection shall be as follows:
4.2,1 Lot. For purposes of quality conformance inspection, a lot shall consist of all assembled
expanders or all spare rolls produced
in one facility using the same materials and production processes, and being offered for delivery
at one time.
4.2.2 Quality conformance inspection sampling. As a minimum, the contractor shall select a
sample quantity of assembled expanders or spare rolls in accordance with table I and inspect them
in accordance with paragraph 4.3. Detection of any nonconforming characteristic in any sample
shall result in rejection of the entire lot. The contractor has the option of correcting the
discrepancy, retesting, and resubmitting a conforming lot or submitting a new lot or submitting a
new lot which shall be inspected and tested as specified herein.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals