 |
|||
|
|
|||
| ||||||||||
|
|  MIL-E-24763A(SH)
w/INT. AMENDMENT 1
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY (USEPA)
40 CFR, Part 60, Appendix A, Method 24 - Determination of Volatile Matter Content, Water
Content, Density, Volume Solids, and Weight Solids of Surface Coatings.
40 CFR Part 261, Appendix II, Toxicity Characteristic Leaching Procedure (TCLP). Test method
for evaluating solid waste physical/chemical methods, SW 846 (NSN-955-001-
00000-1)
Federal Register, Volume 47, Number 103, Appendix A, pages 23376-23389, May 7, 1982.
DEPARTMENT OF LABOR, OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
(OSHA)
Code of Federal Regulations
29 CFR 1910.1200, 1915.99, 1917.28, 1918.9, and 1926.59 Hazard Communication
49 CFR 171-178 Regulations for the Transportation of Hazardous Materials
(The Code of Federal Regulations (CFR) and the Federal Register (FR) are for sale on a subscription basis
by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. When indicated,
reprints of certain regulations may be obtained from the Federal agency responsible for issuance thereof.)
STATE OF CALIFORNIA DEPARTMENT OF HEALTH SERVICES
California Administrative Code Title 22, Division 4, Chapter 30. Minimum standards for
Management of Hazardous and Extremely Hazardous Waste. Section 66699 Persistent and Bioaccumulative Toxic
Substance and Section 66700Waste Extraction Test, Pg. 679-681 (Register 90, Nos. 38-41; 10-12-90).
(Application for copies should be addressed to the Hazardous Material Laboratory, State of California,
Dept. of Health Services, 2151 Berkeley Way, Berkeley, CA 94704)
2.3. Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
American National Standards Institute (ANSI)
ANSI Z 129.1 -
Precautionary Labeling of Hazardous Industrial Chemicals
(Application for copies should be addressed to the ANSI, Inc. 1430 Broadway, New York, NY 10018)
ASTM International
ASTM D185
-
Standard Test Methods for Coarse Particles in Pigments, Pastes, and Paints
ASTM D523
-
Standard Test Method for Specular Gloss. (DoD adopted)
ASTM D562
-
Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU)
Viscosity Using the Stormer-Type Viscometer. (DoD adopted)
ASTM D609
-
Standard Methods for Preparation of Steel Panels for Testing Paint, Varnish,
Conversion Coatings, and Related Coating Products.
ASTM D660
-
Standard Test Method for Evaluating Degree of Checking of Exterior Paints. (DoD
adopted)
ASTM D661
-
Standard Test Method for Evaluating Degree of Cracking of Exterior Paints. (DoD
adopted)
ASTM D714
-
Standard Test Method for Evaluating Degree of Blistering of Paints. (DoD adopted)
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals