 |
|||
|
|
|||
| ||||||||||
|
|  MIL-E-24763A(SH)
w/INT. AMENDMENT 1
ASTM D823
-
Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish,
and Related Products on Test Panels. (DoD adopted)
ASTM D1014 -
Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel. (DoD
adopted)
ASTM D1210 -
Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems.
(DoD adopted)
ASTM D1654 -
Standard Method for Evaluation of Painted or Coated Specimens Subjected to
Corrosive Environments. (DoD Adopted)
ASTM D2243 -
Standard Method for Freeze-Thaw Resistance of Waterborne Coatings. (DoD
Adopted).
ASTM D2244 -
Standard Method for Calculation of Color Differences from Instrumentally
Measured Color Coordinates. (DoD adopted)
ASTM D2697 -
Standard Test Method for Volume Nonvolatile Matter in Clear Pigmented Coatings.
ASTM D2794 -
Standard Test Method for Resistance of Organic Coatings to The Effects of Rapid
Deformation (Impact).
ASTM D2805 -
Standard Test Method for Hiding Power of Paints by Reflectometry.
ASTM D3168 -
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints.
ASTM D3273 -
Standard Test Method for Resistance to Growth of Mold on the Surface of Interior
Coatings in an Environmental Chamber. (DoD adopted)
ASTM D3274 -
Standard Test Method of Evaluating Degreee of Surface Disfigurement of Paint
Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation. (DoD
Adopted)
ASTM D3278 -
Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup
Apparatus. (DoD Adopted)
ASTM D3335 -
Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in
Paint by Atomic Absorbtion Spectroscopy. (DoD Adopted)
ASTM D3359 -
Standard Test Method for Measuring Adhesion by Tape Test. (DoD adopted)
ASTM D3891 -
Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish,
Lacquer, and Related Products
ASTM D4214 -
Standard Test Methods for Evaluating Degree of Chalking of Exterior Paint Films.
ASTM D4400 -
Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator.
ASTM E97
-
Standard Test Methods for Directional Reflectance Factor, 45-Deg, 0-Deg, of
Opaque Specimens by Broad-Band Filter Reflectrometry. (DoD adopted)
ASTM F718
-
Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data
Sheet. (DoD Adopted)
ASTM G53
-
Standard Practice for Operating Light- and Water-Exposure Apparatus (Flourescent
UV-Condensation Type) for Exposure of Nonmetallic Materials. (DoD Adopted)
(Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race
Street, Philadelphia, PA 19103)
(Non-Government standards and other publications are normally available from the organizations that
prepare or distribute the documents. These documents may also be available in or through libraries or other
informational services.)
2.4. Order of Precedence. In the event of a conflict between the text of this document and the references
cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable
laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1. Qualification. The enamels furnished under this specification shall be products that are authorized by
the qualifying activity for listing on the applicable qualified products list (QPL) before contract award (see 4.3, 6.2
and 6.4).
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals