|
| MIL-E-70610(AR)
CALCULATIONS:
Determine the volume of the gaseous products of the explosion at
standard temperature and pressure (STP) by using the equation shown
below:
Where:
Corrected volume in ml. (STP)
Uncorrected volume in ml.
Corrected barometric pressure
Weight of sample (gins)
Absolute temperature of room
correct the initial and final temperature according to
0.
certificate issued with the calibrated Beckman Thermometer, and
include an emergent stem correction.
p. The heat of reaction in cal/gm is calculated from the
equation below:
Heat of Reaction =
PACKAGING
5.
5.1 Preservation and packaqing.
5.1.1 Level C.
Five (5) pounds Eimite shall be packaged in a
conductive polyolefin bag.
(See Note 1)
Size of bag shall be
10-1/2 min. X 18 min. Excess air shall be removed from the bag, by
hand pressure, prior to twisting end of bag, After twisting end,
fold end back on itself and secure with strong elastic band. Place
above in Metal Drum MS24347-5 or MS24347D5 Type I or II Drawing
F8860900 (Note 2). Seal Drum with locking ring, nut and bolt in
accordance with Drawing F8794342.
Sealed drum shall withstand an
air pressure test of three pounds per square inch for fifteen
seconds without leakage.
5.2 Packing.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |