 |
|||
|
|
|||
| ||||||||||
|
|  The maximum G shall be reached in approximately 5-1/2 milli
seconds. The shock shall be applied in the following directions:
Vertically, 3 shocks in each direction.
Parallel to the major horizontal axis, 3 shocks In
each direction.
Parallel to the minor horizontal axis, 3 shocks In
c.
.
each director..
The test specimen shall not suffer damage or subsequently fall
to provide the performance specified by the detail specifica-
tion.
4.3.11.3 Procedure 111. - A high impact shock testing machine
designed and fabricated according to Specification MIL-S-901
shall be set up to produce the magnitude and duration of shock
specified in the detail specification. The number of shocks
and position of the test specimen shall be as specified In the
detail specification. Fuctional tests shall be conducted dur-
ing shock applications according to the requirements of the de-
tail specification. There shall be no mechanical failures due
to the applied shocks.
4.3.11.4
Procedure IV. - The equipment In the regular transport-
able position i n its trailer or trailers shall be transported
five times over the sections of a test course in the order and
at the indicated speeds of Table XXV.
Table XXV - ShocK Test
At the conclusion of the test the equipment shall be operated
and the results compared to those obtained In 4.2.2.
4.3.12 Immersion
4.3.12.1 Procedure I.- The equipment shall be immersed In a
suitable liquid, such as water. The absolute pressure of the
62
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals