 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-44402(GL)
2.2 Non-Government publications. The following documents forms a part of
this document to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted are those listed in the issue of
the DODISS cited in the solicitation. Unless otherwise specified, the issues of
documents not listed in the DODISS are the issues of the documents cited in the
solicitation (see 6.2).
NATIONAL FIRE PROTECTION ASSOCIATION
I
-
National Electrical Code Handbook
NFPA No. 70
I
(Application for copies should be addressed to the National Fire Protection
Association, 80 Battery March Pike, Quincy, MA 02169.)
I
(Non-Government standards and other publications are normally available from
the organizations that prepare of distribute the documents. These documents
also may be available in or through libraries or other informational services.)
I
In the event of a conflict between the text of this
2.3 Order of precedence.
document and the references cited herein, the text of this document takes
I
precedence. Nothing in this document, however, supersedes applicable laws and
I
REQUIREMENTS
3.
3.1 First article. When specified (see 6.2), a sample shall be subjected to
first article inspection (see 6.3) in accordance with 4.3.
3.2 Alternate components. Components offered as equivalent to components
specified hereinafter' and on the referenced drawings as a specific
manufacturer's part or model number or equal, shall be functionally equal to the
manufacturer's model number identified, and of equal or better quality. The
incorporation and inclusion of such a component in the design of the specified
end product shall not require modification or change to any other specified
component, and shall not reduce ease of maintenance to it or any other
components, unless such modification or change is specifically approved by the
contracting officer. Prior to manufacture of the first article, or if none is
required, prior to commencing production, the contractor shall submit for the
contracting officer's approval, a list identifying each proposed alternate
component, together with proof that each listed component complies with
requirements specified above. The contracting officer, at his option, may
require a physical sample of the proposed substitution. Approval of the
submitted listing, together with the necessary supporting data, authorizes
commencement of manufacture but does not relieve the contractor of
responsibility that these components perform in accordance with specified
requirements when incorporated into the end product.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals