 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-44402(GL)
3.2.1 Materials and components. The materials and components shall be as
specified herein and on the applicable drawings. Materials and components not
definitely specified shall be-of the quality normally used by the manufacturer
provided the completed item complies with all the provisions of this
specification. It is encouraged that recycled material be used when practical
as long as it meets the requirements of this specification.
3.3 Design and construction. The design and construction of the finishing
section shall be as specified herein, and in Drawing 5-13-4699 and all
subsidiary drawings and parts lists pertaining thereto. All wiring shall be in
accordance with the provisions of NFPA No. 70.
3.4 Finishing section operation. All electrically operated equipment,
including switches, lights. telephone, papercutter, and heat pumps shall
function without failure when tested for performance and readability as
specified in 4.5.1 and 4.5.2.
3.5 Shelter. The shelter (see 3.8) shall be either desert sand or camouflage
green as specified [see 6.2). All interior and exterior surfaces of the shelter
shall be cleaned and rehabilitated when necessary to restore the original color
and finish.
3.6 Technical manuals. Technical manual, 5-3610-294-13&P, shall be provided
with the Finishing Section and shall be located within the cabinet next to the
papercutter.
3.7 Marking. In addition to existing markings, each completed shelter shall
be marked as specified in 3.7.1 and 3.7.2, and as shown on applicable drawings.
3.7.1 End item identification plates. Identification plates and Drawings
5-13-5026 and 5-13-5029 shall be attached to the exterior of the shelter as
specified on Drawing 5-13-5025. Appropriate information (NSN, weights, and
serial no.) shall be added in the spaces provided on each dataplate.
3.7.2 Center of gravity. The exterior walls of the shelter shall have a
-
-
center of gravity stencil, Drawing 5 13 5001, located as shown on Drawing
5-13-5010, to identify the center of gravity for the shelter when loaded.
3.8 Government furnished property (GFP). The GFP indicated in table I will
be furnished to the contractor by the Government (see 6.2), and shall be a part
of the finishing section.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals