 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-45556A
Groups of non-mating parts
Group II
Group I
Adapter, booster (7268562)
Bearing, ball (hub gear)
Bearing, ball (2 from feeder
(7794617)
shaft) (7794616)
Bearing, ball (feeder shaft-
Clevis (7794555)
booster end) (7794618)
Collar assembly (7794556)
Cam, traveling ring (7794554)
Gear, bevel (7794578)
Gear, drive, booster (7794557)
Housing and guides (w/remaining
Gear, feeder (7794558)
parts attached) (7791086)
Key (7794582)
Ring, traveling (7794562)
Plate, cover (7794583)
Spacer, gear (7790850)
Shaft, actuating (7794563)
Spacer, sprocket and bearing
Sprocket, front (77921094)
(7791088)
Stripper, feeder (7268576)
Spring, helical, compression
Support, clevis and solenoid
(lever shaft) (7794569)
(7794575)
Sprocket, rear (7791095)
Group III
Arm, anti-backlash (7794550)
(w/stop, arm 7794574 attached)
(5 required)
Gear, hub (7790851)
Guide, front, assembly (7268641)
(Shaft, feeder (7791565)
Shaft, lever (7794565)
Shield, clevis (7790682)
Spring, feeder shaft (7268573)
Spring, helical, compression (stop,
arms) (7794570) (5 Required)
4.6.3.1.2 Concurrent repair parts. Concurrent repair parts shall
be tested for interchangeability requirement by dissassembling two feed-
ers, previously tested in 4.6.3.1.1, as necessary and then reassembling
them using the concurrent repair parts. No hand refinement of parts
will be allowed, and the feeders shall operate and function properly.
This test may be performed independently of the feeder interchange-
ability test specified in 4.6.3.1.1, and at more frequent intervals
using accepted feeders taken from current production.
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals