Click here to make tpub.com your Home Page

Page Title: Load test of lever shaft.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-F-50994 (MU)
spected for compliance with the drawing requirement.
4.4.4.2 Load test of No. 2 gear and pinion assembly. -
Apply an axial load perpendicular to the No. 2 gear and in
such a direction as to test the assembly of the No. 2 gear
and pinion. The resistive force shall act against the No. 2
gear. Upon removal of the resistive force, the maximum per-
missible gap shall be inspected for compliance with the drawing
requirement.
4.4.4.3 Load test of escapement gear and pinion assembly. -
Apply an axial load perpendicular to the escapement gear and in
such a direction as to test the assembly of the escapement gear
and pinion. The resistive force shall act against the escape-
ment gear. Upon removal of the resistive force, the maximum
permissible gap shall be inspected for compliance with the
drawing requirement.
4.4.4.4 Load test of lever shaft. - Apply an axial load
perpendicular to the lever and in such a direction as to test
the assembly of the lever and lever shaft. The resistive force
shall act against the lever. Upon removal of the resistive
force, the maximum permissible gap shall be inspected for com-
pliance with the drawing requirement.
4.4.4.5 Load test of lever palette. - Apply an axial load per-
pendicular to the lever and in such a direction as to test the
assembly of the lever and the lever pallet. The resistive force
shall act against the lever. Upon removal of the resistive force,
the height of the lever pallet above the lever shall be inspected
for compliance with the drawing requirement.
4.4.4.6 Load test of annular gear. - Apply a load perpendicu-
lar to the rotor and in such a direction as to test the assembly
of the annular gear studs to the annular gear and the rotor. The
resistive force shall act against the rotor. Upon removal of
the resistive force, the distance from the face of the rotor to
the outside face of the annular gear shall be inspected for com-
pliance with the drawing requirement.
4.4.4.7 Load test of lock roller pin. - Apply an axial load
perpendicular to the rotor and in such a direction as to test the
strength of the assembly of the lock roller pin to the rotor. The
resistive force shall act against the rotor.
4.4.4.8 Torque Test of Lever Shaft. - A Torque shall be
applied between the lever and the lever shaft.
34

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business