|
| MIL-F-50994 (MU0
5.1 Packing and marking for the Fuze, Rocket, M423, Modi-
fied (Bunker) less Booster and Lead shall be as specified on
drawings 9275050 and 9275051.
6. NOTES
6.1 Ordering data. - Procurement documents shall specify the
following:
a. Title, number and date of this specification.
b. Data cards. - Data cards shall be prepared for each lot in
accordance with the information specified in Standard MIL-STD-166.
6.2 Inspection code numbers. - The five digit code numbers
assigned to the inspection herein are to facilitate future data
collection and analysis by the Government.
6.3 Inspection equipment. - The contractor shall deSign
inspection equipment as required by the referenced inspection
Equipment Lists (EL) in accordance with the instructions of
paragraphs 6.3.1 through 6.3.5.
6.3.1 Inspection equipment lists. - Inspection equipment
lists indicate the availability of inspection equipment design
by showing in the "number" column of the list of inspection
equipment (Form SMUPA 1010) the numbers of drawings or Federal
Stock numbers of existing equipment designs, or codes as indi-
cated in paragraph 6.3.2. Design action required of the con-
tractor is described in paragraphs 6.3.3 and 6.3.4. The con-
tractor will be required to prepare detailed drawings in accor-
dance with 6.3.4 for all the equipment coded as "Contractor
Design" in the number column. These contractor designs must
be approved by the Government prior to fabrication or procuring
of the equipment. Design shall be submitted for approval as
specified in 6.3.5.
6.3.2 Inspection equipment list codes. - The inspection
equipment as defined in 6.3.3 and 6.3.4 will be designated in
the EL by the following codes:
CD - Contractor design on controlled contractor format
and/or commercial equipment.
MU - Army design, mandatory for use.
6.3.3 Army designs. - Army designs are reflected on de-
tailed drawings which completely depict all the information
38
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |