Click here to make tpub.com your Home Page

Page Title: Levels of preservation and packaging.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




MIL-F-5577B
turque specified by the manufacturer shall be
PPP-B-636, MIL-B-138, PPP-B-585, PPP-
applied. The fitting assembly, mounted in a
B-601 or MIL-B-10377. Plywood, when used
vibration jig conforming to figure 1, shall be
shall be Type I or II, Class 2 conforming to
subjected to the applicable fluid resistance test
Specification NN-P-515. Shipping containers
described in table VII. by indication of fluid
shall have case liners conforming to Specifica-
leakage, deterioration, or damage shall consti-
tion MIL-L-10547 and appendix thereto. Case
liners for boxes conforming to Specification
tute failure unless it can be shown that the
PPP-B-636 may be omitted, provided all
leakage was caused by "O" ring failure. In case
joints of the boxes are sealed with tape as
of "0" ring failure the "0" ring may be re-
specified in the box specification. The gross
placed and the test continued.
weight of each container shall not exceed 200
4.5.3.2.2 Pullout test. Same procedure and
pounds. The gross weight of fiberboard con-
requirements at 4.5.3.1,3.
tainers shall not exceed the weight limitations
4.5.3.2.3 Insert test. Same procedure and
of the applicable container specification. Con-
requirements as 4.5.3.1.4.
tainers shall be closed and strapped in accord-
4.6 Inspection of preparation for delivery.
ance with the applicable container specifica-
The Inspector shall ascertain that the prepara-
tion for delivery of tank fittings conform to
tion and appendix thereto.
the requirements of section 5 of this specifica-
5.2.2 Level B. Fittings, preserved and
tion.
packaged as specified in 5.1.1 or 5.1.2 shall be
packed in domestic-type shipping containers
5. PREPARATION FOR DELIVERY.
conforming to Specifications PPP-B-636,
5.1 Levels of preservation and packaging.
PPP-B-585, PPP-B-591, PPP-B-601, PPP-
5.1.1 Level A. Each fitting shall be pre-
B-621 or MIL-B-10377. The gross weight of
served and packaged in accordance with Speci-
each shipping container shall not exceed 200
fication MIL-P-116, Method 1C and overpack-
pounds. Fiberboard boxes shall not exceed the
aged in containers conforming to Specifica-
limitations of the applicable box specification.
tion MIL-B-4229, PPP-B-566, PPP-B-676
(containers shall be closed and strapped in ac-
or PPP-B-636. Corrosion preventive com-
cordance with the applicable container specifi-
pound shall conform to Specification MIL-C-
cation and appendix thereto. When fiberboard
6529 when its use is approved.
containers are used, the fiberboard shall meet
5.1.2 Level B--limited military package
the requirements of table I of Specification
(for domestic shipment with maximum storage
PPP-B-636.
of 180 days). Fittings shall be preserved and
5.3 Physical protection. Cushioning,
packaged in accordance with manufacturer's
blocking, bracing, and bolting as required shall
commercial practice. Unit quantities shall be
be in accordance with Specification JAN-P-
as specified by the procuring activity. Pack-
100, except that for domestic shipments, water-
aging material in direct contact with unpro-
proofing requirements for cushioning materials
tected surfaces susceptible to damage by cor-
and containers shall be waived. Drop tests of
rosion shall conform to Specification MIL-B-
Specification JAN-P-100 shall be waived for
121, MIL-P-4185, MIL-A-148, or MIL-B-
levels B and C.
130.
5.4 Marking of shipments. Interior pack-
5.1.3 Level C--minimum military package
ages and exterior shipping containers shall be
(for domestic shipment with immediate use at
marked in accordance with Standard MIL-
initial destination).  Fittings shall be pre-
STD-129.
served and packaged in accordance with manu-
facturer's commercial practice.
6. NOTES
5.2 Levels of packing.
6.1 Intended use. This specification covers
the requirements for fittings for fluid tanks
5.2.1 Level A. Fitting preserved and pack-
aged as specified in 5.1.1 shall be packed in
used in conjunction with powerplants.
overseas type. shipping containers, conforming
6.2 Ordering data. Requisitions, contracts,
to Specifications PPP-B-591, PPP-B-621,
and orders should state the quantity, type,
13

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business