 |
|||
|
|
|||
| ||||||||||
|
| MIL-F-60020(MU)
DRAWINGS
equally distributed upon all three prongs
parallel to the axis of the assembly when
ORDNANCE CORPS
tested as specified in 4.4.1.
-- Fuze, Mine, Combi-
8866643
3.5 Functioning. The metal parts as-
nation, M 10 A 2,
sembly shall function when a load, not to
Assembly.
exceed 10 pounds is applied to the release
pin ring parallel to the axis of the release
-- Box, Packing, for
8882274
pin and when a load, not to exceed 20
Fuze, Mine, Com-
pounds is applied to any one prong or
bination, M10A2,
equally distributed upon all three prongs
Less Igniter As-
parallel to the axis of the head assembly.
sembly.
The test shall be performed as specified in
4.4.2,
PUBLICATIONS
3.6 Workmanship. All parts shall be
fabricated and finished in a thorough,
ORDNANCE CORPS
workmanlik e manner. They shall be free
of burrs, chips, sharp edges, cracks, un-
-- Index of Inspection
IEL-9200011
blended radii, surface defects, dirt, grease,
Equipment Lists.
rust, corrosion, and other foreign matter.
The cleaning method used shall not be in-
(Copies of specifications,
drawings
standards,
and publications required by suppliers in connec-
jurious to any part nor shall the parts be
tion with specific procurement functions should he
contaminated by the cleaning agent. All re-
obtained from the procuring activity or as directed
quired markings shall be neat and sharply
by the contracting officer.)
defined.
3.
REQUIREMENTS
4. QUALITY ASSURANCE
PROVISIONS
3.1 Material. Materials and parts shall
be in accordance with applicable drawings
4.1 General quality assurance provisions.
and specifications.
Unless otherwise specified in the contract
or purchase order, the supplier is responsi-
3.2 Assembly. The parts assembly shall
ble for the performance of all inspection
comply with all requirements specified on
requirements specified herein. Except as
Drawing (dwg.) 8866643 and with all re-
otherwise specified, the supplier may utilize
quirements specified in applicable specifi-
his own or any other inspection facilities
cations.
and services acceptable to the Government.
3.3 Embrittlement of springs. Pres-
Inspection records of the examinations and
sure springs, pull springs, firing pin springs
tests shall be kept complete and available to
and release pin springs shall not break when
the Government as specified in the contract
extended to the minimum point of perma-
or order. The Government reserves the
nent distortion when tested as specified
right to perform any of the inspections set
in 4.4.3.
forth in the specification where such inspec-
3.4 Nonfunctioning. The metal parts as-
tions are deemed necessary to assure that
sembly shall not function when a load, not
supplies and services conform to prescribed
requirements. Reference shall be made to
to exceed 3.0 pounds, is applied to the re-
lease pin ring parallel to the axis of the
Standard MIL-STD-109 in order to define
release pin and when a load, not to exceed
terms used herein. The provisions of Speci-
8.0 pounds, is applied to any one prong or
fication MIL-A-2550 shall apply.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals