Click here to make tpub.com your Home Page

Page Title: Inspection lot formation.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-F-63446B (AR)
4.3.2 Inspections to be performed. As determined by the Goverment the first article
assemblies, components and test specimens may be subjected to any or all of the examinations and
tests specified in this detail specification (see TABLE I) and be inspected for compliance with any
or all requirements of the applicable drawings.
4.3.3 Rejection. If any assembly, component or test specimen fails to comply with any of
the applicable requirements, the first article sample shall be rejected. The Government reserves
the right to terminate inspection upon any failure of an assembly, component or test specimen to
comply with any of the requirements.
4.4 Quality conformance inspection.
4.4.1 Inspection lot formation. The term "inspection lot" is defined as a homogeneous
collection of units of product from which a representative sample is drawn or which is inspected
100 percent to determine conformance with applicable requirements. Units of product selected
for inspection shall represent only the inspection lot from which they are drawn and shall not be
construed to represent any prior or subsequent quantities presented for inspection. Homogeneity
shall be considered to exist provided the inspection lot has been produced by one manufacturer, in
one unchanged process, using the same materials and methods, in accordance with the same
drawings, same drawing revisions, same specifications and same specification revisions. All
material submitted for inspection in accordance with this specification shall comply with the
homogeneity criteria specified herein, regardless of the type of inspection procedure which is
being applied to determine conformance with requirements. Inspection lots shall comply with the
lot formation provisions of MIL-A-48078. In addition, inspection lots of loaded fuzes shall
contain the following:
a. Detonators from not more than two M55 production lots with same interfix number
from one manufacturer.
b. Short and long lead assemblies from not more than two production lots with same
interfix number from one manufacturer.
The quantity in each production lot of fuzes shall not exceed 45,000.
4.4.2 Examination and tests.
a. Classification of characteristics. Quality conformance examinations and tests are
specified in the following Classification of Characteristics paragraphs. The contractor's quality
program or detailed inspection system shall provide assurance of compliance of all characteristics
with the applicable drawing and specification requirements utilizing as a minimum the
conformance criteria specified. When cited herein, attributes sampling inspection shall be
conducted in accordance with Table II below, using the inspection levels stated in the
Classification of Characteristics paragraphs.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business