Fuzes, General Purpose Grenade: M230 and M231 (Practice)

• Fuzes, General Purpose Grenade: M230 and M231 (Practice)
• Non-Government publications.
• Fuze assemblies and parts
• Safety pin removal.
• Quality Assurance Provisions
• Submission-cont
• Table 1. First article inspection
• Fuzes, General Purpose Grenade: M230 and M231
• Fuzes, General Purpose Grenade: M230 and M231-cont.
• Fuzes, General Purpose Grenade: M230 and M231-cont.
• Fuzes, General Purpose Grenade: M230 and M231-cont.
• Fuzes, General Purpose Grenade: M230 and M231-cont.
• Fuzes, General Purpose Grenade: M230 and M231-cont.
• Fuzes, General Purpose Grenade: M230 and M231-cont.
• Fuzes, General Purpose Grenade: M231-cont.
• Fuzes, General Purpose Grenade: M231-cont.
• Fuzes, General Purpose Grenade: M230-cont.
• Inspection lot formation.
• Table 2. Attributes sampling inspection.
• Quality Conformance Inspection
• Slider
• Body, Fuze
• Body, Fuze-cont.
• Body, Fuze-cont.
• Spring, slider
• Screw, Pivot
• Anti-twist Pin
• Sleeve, Fuze Body
• Fuze Body Assembly
• Trigger
• Pin, Arming
• Wire, Shear
• Slider, M55 Detonator Assembly
• Pin, Safety
• Pinion, Escapement
• Gear, Escapement
• Escapement Gear-Pinion Assembly
• Pinion, No. 1
• Gear, No. 1
• No. 1 Gear Pinion Assembly
• Pinion No. 2
• Gear No. 2
• No. 2 Gear-Pinion Assembly
• Lever
• Pallet, Lever
• Shaft, Lever
• Lever Assembly
• Plate, Bottom
• Plate, Top
• Pillar
• Escapement Gear Assembly
• Body, Firing Pin
• Pin, Straight
• Firing Pin, Subassembly
• Cap, Firing Pin
• Spring, Firing Pin
• Firing Pin Assembly
• Ball, Detent
• Plate, Barrier
• Spring, Arming Lock Pin
• Disc, Closing
• Lead Cup, Short
• Lead Cup Assembly, Short
• Lead Cup, Long
• Lead Cup Assembly, Long
• Plate Assembly, Barrier (M230)
• Screw, Modifier Drive
• Barrier Plate Assembly with Retainer Tape
• Fuze General Purpose Grenade, Practice:M231
• Fuze General Purpose Grenade, Practice:M231-cont.
• Fuze General Purpose Grenade, Practice:M230
• Fuze General Purpose Grenade, Practice:M230-cont.
• Spring embrittlement.
• Figure 1. Defect zone
• Table 3. Maximum allowable pore size and frequency per location
• Lead output.
• Helicopter vibration.
• Shear wire pull test.
• Fuzing No-Go Test
• Arming pin/slider lock and auto trigger test.
• Acquisition requirements.
• Standardization Document Improvement Proposal
• Blank Page

Fuzes, General Purpose Grenade: M230 and M231 (Practice)

Privacy Statement - Press Release - Copyright Information. - Contact Us