Fuze, Point Initiating Base Detonating, XM764

• Fuze, Point Initiating Base Detonating, XM764
• Specifications, standards, and handbooks-cont.
• Other publications
• Order of precedence
• Housing and mechanism assembly
• Operating range
• Embrittlement of springs
• Molded components
• Submission-cont.
• Submission-cont.
• Submission-cont.
• Acceptance criteria for ballistic and environmental testing
• Table 1. First Article Inspection
• Fuze, Point Initiating Base Detonating, XM764
• Process controls and plans
• Examination-cont.
• Table 2. Quality Conformance Inspection
• Coil Assembly
• Armature
• Plate
• Armature Assembly
• Cover, Bottom
• Disc, Shear
• Magnet
• Setback Generator Assembly
• Capacitor, Ceramic Monolithic
• Diode, Rectifier
• Trembler Switch
• Trembler Switch-cont.
• Wire, Terminal, S2
• Printed Wiring Board Assembly
• Contact, 90
• Cover, Contact, Top
• Cover, Contact, Bottom
• Housing, Rotor
• Housing, Rotor-cont.
• Housing Assembly
• Weight, Drag
• Drag Weight Assembly
• Spring, Drag
• Molded Housing Assembly
• Molded Housing Assembly-cont.
• Detonator and Contact Assembly
• Pin, Limit
• Pin, Trap
• Pin, Rotor
• Rotor
• Rotor-cont.
• Rotor and Pin Assembly
• Cam
• Pin, Leaf
• Spring, Leaf
• Follower, Cam
• Cam Follower Assembly
• Spring, Rotor
• Release Mechanism Assembly
• Housing and Mechanism Assembly
• Housing and Mechanism Assembly-cont.
• Pin, Contact
• Pin, Connector
• Connector Assembly
• Shield
• Shield Assembly
• Cup, Lead
• Lead Cup Assembly
• Cover, Shield
• Fuze, PIBD, XM764
• Fuze, PIBD, XM764-cont.
• Packing and Marking for Barrier Bag Assembly Fuze, PIBD, XM764-Prior to Sealing
• Packing and Marking for Barrier Bag Assembly Fuze, PIBD, XM764-Just Prior to Insertion Into Next Assembly
• Packing and Marking for Barrier Bag Assembly Fuze, PIBD, XM764
• Packing and Marking for Fiberboard Box for Fuze PIBD, XM764
• Detonator and contact assembly check test
• Potting voids (Major Defect)
• Fuze non-function (Critical Defect)
• Capacitor environmental conditioning
• Release mechanism assembly
• Setback generator assembly
• Centrifuge arming
• Assembly and firing of test cartridges
• Arming range
• Extreme temperature storage
• Material examination
• Radiographic inspection of fuzes
• Setback generator assembly leak test
• Connector assembly load tests
• Lead cup assembly tests
• Insulation resistance (Hi-Pot) test
• Reuse of packaging materials
• Ordering data
• Cost of check test
• Firing record information
• Definition of levels of packaging and packing
• Early burst
• Figure 1. Centrifuge Test Circuit
• Figure 2. Typical Oscilloscope Trace
• Figure 3. Detonator Contact Button
• Figure 4. Trap Pin
• Standardization Document Improvement Proposal
• Blank Page
• Instructions

Fuze, Point Initiating Base Detonating, XM764

Privacy Statement - Press Release - Copyright Information. - Contact Us