 |
|||
|
|
|||
| ||||||||||
|
|  MIL-G-46858A
detailed specification. These parameters shall include but not be limited to the
following:
a. Actuator gain
b. Characteristic time
c. Time delay
3.6 Interchangeability. - Unless otherwise specified by the procuring activity (see
6.2), the interchangeability of the missileborne guidance and control system, its
subsystems, and components shall be in accordance with MIL-STD-454, Requirement
7.
* 3.7 Marking. - Identification of product shall be in accordance with Requirement 67
of MIL-STD-454, MIL-STD-130 and the detail specification.
3.7.1 Marking requirements to prevent damage. - Equipment which may be damaged
by operation in excess of the duty cycle shall be so marked.
3.8 Workmanship. - Workmanship shall be in accordance with MIL-STD-454,
Requirement 9, for electronic equipment and in accordance with the detail
specification for mechanical equipment.
4. QUALITY ASSURANCE PROVISIONS.
* 4.1 Responsibility for inspection. - Unless otherwise specified in the contract or
purchase order, the supplier is responsible for the performance of all inspection
requirements as specified herein. Except as otherwise specified in the contract or
order, the supplier may utilize his own or any other facilities suitable for the
performance of the inspection requirements specified herein, unless disapproved by the
Government. The Government reserves the right to perform any of the inspections set
forth in the specification where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
4.2 Classification of tests. - The inspection and testing of the system equipment shall
be classified as follows:
a. Preproduction tests .................................... (see 4.4)
b. Acceptance tests ....................................... (see 4.5)
4.3 Test conditions. - Unless otherwise specified by the procuring activity (see 6.2),
the following general test conditions shall apply to all tests of this specification.
20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals