 |
|||
|
Page Title:
Minor characteristics and tests- Acceptance |
|
||
| ||||||||||
|
|  MIL-G-50960 (MU)
4.3.2.1.4 Packing and marking for storage and
shipments (see dwg 8808362).
Method of Inspection
Characteristics
Categories
Critical: None defined.
Major:
101. Gross load weight, max . . . . . . . . . . . . . . . . . . . *Measure
102. Contents tight in package . . . . . . . . . . . . . Manual
103. Properly packed . . . . . . . . . . . . . . . . . . . . Visual/Manual
104. Material (see 3.1) . . . . . . . . . . . . . . . . . . . . . . . Visual
*Determine weight with suitable scale.
Minor:
201. Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Visual
202. Workmanship (see 3.3) . . . . . . . . . . . . . . . . . . Visual/Manual
4.3.3 Testing. Not Applicable.
4.3.4 Acceptance inspection equipment.
4.3.4.1 critical and major characteristics and tests.
Inspection and testing shall be performed with the acceptance
inspection equipment operating instructions, and calibration
instructions specified on the Equipment Lists (EL) (See
EL-8791668 or EL-8791670). When either of the ocnditions listed
below exist the contractor shall design required equipment or
specify suitable commercial equipment and obtain approval
prior to use on the contract.
a. Any deviation from equipment or procedures
specified on the EL is desired (see 6.3).
b.
The code "CD" is listed in the "Part or
Identifying Number" column on the EL (see 6.1.2).
4.3.4.2 Minor characteristics and tests- Acceptance
inspection equipment for minor characteristics is not
specified On ELs. The acceptance inspection equipment,
operating instructions and calibration instructions used
by the contractor for minor classification inspection shall
be approved by the Government representative authorized by
the procuring agency.
4.4 Test methods. Not applicable.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals