 |
|||
|
|
|||
| ||||||||||
|
|  MIL-G-82455 (OS)
(b)
Serialization
c
Packing Quantity
()
(d)
Assigned activity for preproduction and periodic tests
All additional samples required shall be provided and
(e)
inspected at the expense of the supplier, when such
additional samples are required because of failure of
any sample(s) to pass the prescribed periodic production
inspections
Data required other than that specified in 3.3.1
(f)
Any exceptions to this specification.
(g)
Definitions. -
6.3
Generator Condition.-
6.3.1
6.3.1.1
Nonoperating. -
The condition of the Generator (with
safety pin installed) when stored, transported, or handled.
Ready, nonoperating and ready.- The condition of the
6.3.1.2
Generator when assembled with the end item (safety pin removed),
transported, and handled.
Operating is the condition of the
6.3.1.3
Operating.-
Generator when operating.
6.3.2 Vibration.- Vibration is a sinusoidal motion defined
by amplitude and frequency. The amplitude may refer to displacement
or to acceleration. The displacement is given in inches peak to peak.
The acceleration is given in multiples of gravitational acceleration
(g's). The frequency is given in cycles per second (cps).
6.3.3 Shock.- Shock is an abrupt change in the motion of a body
resulting from the sudden application of a large external force of short
duration. Shock is described as a pulse in multiples of gravitational
acceleration (g's), duration in units of time, milliseconds (ms), and
a shock pulse approximating a one-half sine wave. The time duration
shall be measured between two points where two lines, tangent at
maximum slope, intersect the "zero" g line.
18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals