 |
|||
|
|
|||
| ||||||||||
|
|  MIL-H-15362B(AER)
PUBLICATIONS
Bureau of Aeronautics
NAVAER 16-1-524
Design and Guidance Manual for Test Bench
Harness
DRAWINGS
Bureau of Ships
S9101-212410
Shipboard Workbench for Aviation Electronics
Shops
2.2
Availability of Documents
(1) When requesting applicable documents give both the title and the number.
All requests should be made via the cognizant Inspector of Naval Material
or Bureau of Aeronautics Representative
(2) Copies of this specification and applicable documents may be obtained upon
application to the Commanding Officer, Naval Aviation Supply Depot (AD),
Philadelphia 11, Pennsylvania
(3) Copies of Bureau of Ships drawings may be obtained upon application to the
Bureau of Ships, Navy Department, Washington 25, D.C.
23
Precedence - When the requiremetns of the contract, this specification or applicable
subsidiary specifications are m conflict, the following precedence shall apply.
(1) Contract - The contract shall have precedence over any specification
(2) This Specification - This specification shall have precedence over all applicable
subsidiary specifications. Any deviation from this specification, or from sub-
sidiary specifications where applicable, shall be specifically approved in
wrong by the Bureau of Aeronautics
(3) Referenced Specifications - Any referenced specification shall have precedence
over all applicable subsidiary specifications referenced therein. All referenced
specifications shall apply to the extent specified,
3
REQUIREMENTS
31
Descriptive
3. 1.1
Contents - The test bench harnesses covered by this specification may consit of fixed
and portable rack, clamps brackets, junction boxes, cable assemblies, power control and overload
protective devices, test points and cooling devices.
3.1.2
Function - The test bench harness shall hold, position, electrically and mechanically
connect, cool as necessary, protect from electrical and mechanical damage, and provide suitable
auxiliary test points to allow operation and facilitate testing and maintenance of the equipment for
which it is designed
Application - The test bench harness shall be suitable for use in shore or ship
3.1.3
based workshops in the testing and maintenance of avionics equipment.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals